The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. Previous page Next page 1 The More 2 The Pursue Previous page Next page 1 3 Center + 2 Side Fins 2 Camera + M6 Mount 3 Multi-function Mounts 4 Expanded Storage Capacity 5 Safer + Convenient Previous page Next page 1 INFL Seat & Footrest 2 Dual Dual Pump 3 4th Gen Paddle 4 CONV Strap & Cup Holder 5 Roomy Backpack + Drybag Key points to inflate the board -Ensure that the air valve pin is in the upright position before inflating. Also, verify that the hose is securely connected to the inflation port of the pump； -For maximum efficiency, utilize the dual-action mode during the initial stages of inflation; -The pressure gauge is sensitive and will indicate 1 PSI increments. The board will reach its full shape at this initial pressure; -Once reaches approximately 7 PSI, switch to single-action mode for labor saving. Recommended pressure: 12-15 PSI. The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. Key points to inflate the seat -The recommended air pressure for inflatable seats is 5-8 PSI. -The back of the chair is padded and designed for optimal comfort when leaning. -Adjust the length of the ropes to alter the angle of the seat, thus increasing comfort and support. The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. Key points to assemble the paddle -Before turning the tension lever, ensure pull out the inner shaft first. Avoid overturning the tension lever as this can cause the tension mechanism to break; -Ensure the correct orientation of the handle and blade. The design is ergonomic, so feel the difference in handling with various orientations; - It's recommended that the paddle height is 4” to 6” higher than head; - The fully assembled paddle is buoyant and can float for at least one hour. However, the single middle shaft is not buoyant The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. Key points to attach the leash -When falling off the board, the water flow and the natural force of the fall can push the board away from you; -Always remember to attach the leash to the board and your ankle or wrist. It can be a lifesaver in case you fall off the board unexpectedly; -The leash we provide is 10 feet long, constructed with a 7mm cord TPU line and SUS swivels on both ends. It is one of the best leashes on the market, offering superior strength, reliability, and comfort. The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. Key points to attach the foam footrest -Rotate the tube as needed for easier and more convenient insertion. -Ensure that one end of the tube is slightly longer than the other. -Insert the longer end of the tube first, then install the other end. -Finish it. The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. Key points to use the WP waist bag -Position the bag to ensure that the mobile phone camera is easily accessible for convenient shooting; -Ensure that the inner seal is securely and completely closed; -Align the Velcro closures to ensure a secure and tight fit. The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.