1-instructions poor, needed to indicate top, bottom R , L , on the frame and the instructions, it took a while to figure, could have been much easier2-some of the welded pieces are not straight , so need to wiggle some to appose the intended screw slots, also if follow instructions , some screws wont reach , so need to use the longer screws (provided)3-the tubing has a square open area at the top , so if intend to put it outside need to seal or else will fill with rain water , and rust much faster, a plastic end cap would have been nice.4-paint job so-so , if intend to put outside , needs a second coat of paint to cover the unpainted spotsThe second plant stand doesn’t stand up straight. I have to make sure I have heavy plants on the back of the shelves to balance the tendency to lean forward. I will probably find something to shim one side of the uprights.Hard to assemble. Welded areas did not match up. Top shelves tilted.Plant stands are quite sturdy for the price.Loved how easy it was to assembleThey were supposed to cut the hole closer to the correct side. They put the hole way far off and I can not use what I boughtMine came without any hardware except for the screws. Also no instructions. Any one out there have the parts list?