This is very well designed and high quality. There are lots of pieces and hardware, but the instructions were clear and I was able to put it together by myself. However I really could have used a second person when attaching the right top panel over the turn table section. You really need someone to hold it up while putting in the 4 short screws to hold it in place. I was able to do it after several frustrating tries. The back panel is wood and not some cardboard back. There is a hole on each side in the back to feed cables, etc. (I don't think the spec I viewed prior to buying it showed the back hole on the right for the turn table). The biggest criticism I have regards the last step when installing the left outer door panel. Each sliding door has two pins on the top. The pins have to be "down" to get the door in and then you manually slide the pins up to hold the door in place. I was able to do that for the left pin. But since you have to be able to access the pin on the back of the door to slide it up, I couldn't slide the pin up on the right because the inner sliding door on the right is in the way. They should have designed the pins with a spring that don't require manual manipulation. I was short one screw when assembling it, but it came with extra hardware so crisis averted. Overall, I'm very pleased with my purchase. I made sure I measured my equipment first to ensure it would fit in this console.