If you own the Epson R3000 professional color printer you will find this stand is a perfect match. It will actually accommodate a wider printer easily.The R3000 printer sits on the top shelf with plenty of room on either side (enough to put something else).When you "open" the printer (rear and front carriers) you will find the room is still perfect because the stand is on wheels and it can be positioned away from walls or shelves as needed. (When you open the rear and front carriers they take up space in front and back of the R3000, but it just requires you to move the stand if it doesn't clear any walls or bookcases).When not using it, I keep the printer closed and covered with the stand positioned against one of my bookcases or walls as the case might be. Then simply position it as needed when printing. Meaning, when I use the printer (and it can be over several contiguous days) I just reposition the stand as needed so that the rear and front racks clear it. If you have plenty of room you can leave it sitting in the same place.The shelves below the top allow you to stack paper etc - I keep different size professional and gallery quality papers as large as 13x19, 11x14, 8x10, 5x7, 4x6, etc. I also keep several rolls of canvas, and professional photo paper. And of course a crate with inks. The R3000 is a thirsty printer. Ink prices being what they are, I do wish we could drill for ink or convert fat into ink. Ink prices are higher than oil.The stand is very attractive and complements the printer and any office, lab, studio where you may keep the printer and stands.A very neat, practical, clean and impressive setup. Being able to wheel is is priceless even if you only move it a few inches each way. When the printer is in operation the stand sits still specially with the wheels locked.It was NOT terribly difficult to assemble (30+ min while watching TV), it includes all the tools you need and it came with just enough bolts and hardware (no extras). And yes, the casters are plastic and kind of small and only 2 lock, but they do the job.One day if I break them, I will replace them with metal ones but for now they are fine.I do wish the stand was cheaper but quite frankly I couldn't find ANYTHING that compared to the height and size of this unit.It is fairly sturdy but not overly hefty. I carried it up to my studio on the second floor with little trouble resting on the steps as needed.I'm very happy with my purchase, and highly recommend it, specially for an R3000,